Features
1. Safe to use, fast heating, high thermal efficiency and even heating.
2. It can be used as auxiliary heating for refrigeration and air-conditioning compressors, motors and other equipment.
3. The silicone rubber heater is waterproof, oil-resistant and acid-resistant.
4. Built-in highest quality thermal overload protection switch for power saving.
5. Easy to use, safe and long service life, not easy to age.
Package Included
1 x Heating pad(US plug) Product Description: This product is mainly composed of alloy heating wire and silicone rubber high-temperature insulating cloth. It heats up quickly, is heated evenly, has high thermal efficiency, and has good toughness. It meets the flame resistance standard of UL 94-V0 in the United States. And easy to use, waterproof, long life. The product can reach a constant temperature within ten minutes. Features 1. Safe to use, fast heating, high thermal efficiency and even heating. 2. It can be used as auxiliary heating for refrigeration and air-conditioning compressors, motors and other equipment. 3. The silicone rubber heater is waterproof, oil-resistant and acid-resistant. 4. Built-in highest quality thermal overload protection switch for power saving. 5. Easy to use, safe and long service life, not easy to age. Specification: * US Plug: 110V 120W * Material: alloy wire, silicone rubber * Color: orange * Maximum temperature of insulating material: 220 degrees * Power error: 8% * Insulation resistance: ≥5 MΩ * Compressive strength: 1500v/5s * Resistor voltage: 6KV * Heater size: 9x13 cm/3.54"x5.12" * Line length: 200cm * Scope of application: various automobile fuel tanks, water tanks, batteries, antifreeze and heat insulation. ⭐⭐ Instructions: - Use pressure sensitive adhesive on flat and smooth workpieces - The maximum operating temperature of the pressure-sensitive adhesive: 150°C continuous temperature, 220°C instantaneous temperature. Power density less than 0.9 W/c ㎡ - When using the electric heating device, it must be noted that its working temperature should be lower than 220 °C, and the instantaneous continuous use should not exceed 220 °C. - When the working temperature is lower than 220℃, the current density can reach 3 w/c ㎡ - Paste installation conditions, allowable operating temperature is less than 150 ℃ - The selection of working voltage is based on the principle of high power and high voltage and low power and low voltage, with exceptions for special needs. - The silicone rubber heater with pressure-sensitive adhesive should be used within half a year after processing, otherwise it will affect the performance of the glue Package Included 1 x Heating pad( US plug ) Notes: Please allow 1-3cm error due to manual measurement. Due to factors such as shooting angle and light, there may be chromatic aberration in color.
Returns Accepted for this item if it's within 30 Days